.png?width=768&optimizer=image)
Wet scrubbing manually with pad or pad sponge (without equipment)
Removing heavy, stubborn soiling from surfaces using the pad or pad sponge. Suitable for water-resistant, smooth and slightly textured surfaces.
Preparatory work
Select suitable products to match the surface to be cleaned (type and m2) and the type of soiling.
Put up the warning sign.
Fill the foam dispenser or bucket with cleaning product in accordance with the dosing instructions.
Remove any loose dirt (dust-binding wiping or rinsing with water).
Main task
Moisten the pad or pad sponge with the cleaning solution and gently wring out if necessary.
Wet scrub the surface with the pad or pad sponge.
Allow the cleaning solution to take effect as needed, but don't let it dry.
Rinse out the dirty pad or dirty pad sponge when necessary or replace as needed.
As needed, repeat steps 1 to 4 of the main task.
For very heavy soiling: Rinse the surface with water or use a moist or wet cleaning textile or a gently wrung-out pad sponge.
Mop up the dissolved dirt and the remaining cleaning solution with the dry, folded cloth. Change the cloth face when it gets dirty.
Replace the cloth once all cloth areas have been used.
Perform a visual check.
Final steps
Remove the warning sign.
Wash the used pads and cloths in the washing machine. Rinse out the used pad sponges well and leave them to air-dry.
Dispose of any waste.
Clean the cleaning equipment and replace as needed.
Comments
Wear the personal protective equipment (PPE) required by company regulations, safety data sheets and / or instructions for use.
Always check in advance which product meets your requirements (see Wetrok Cleaning & Care Instructions).
Wetrok AG accepts no liability for damage caused by improper use or incorrect product selection.